DVD Changer, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Open the glove compartment.

-- Remove any DVD still in the DVD Changer -R161-.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Insert the two clips on the Radio Removal Tool T10057 in the release slits on the DVD Changer -R161- -1- until they engage. Points on the grip eyelets of tool face outward.

Fig 1: Inserting Two Clips On Radio Removal Tool T10057 In Release Slits On DVD Changer -R161- -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the DVD Changer -R161- from the mounting frame.

-- Unlock and disconnect the connectors from the DVD Changer -R161-.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS 6223/9 -1- onto the MOST bus connector -2-.

Fig 2: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9

Courtesy of AUDI OF AMERICA, LLC

-- Press the locking latches on the DVD Changer -R161- to remove the Radio Removal Tool T10057.