LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Communication) >> 91 Communication >> Antenna Systems >> Antenna Amplifier, Removing And Installing >> Antenna Amplifier -R24- / Antenna Amplifier 4 -R113-, Removing And Installing >> Removing

Antenna Amplifier -R24- / Antenna Amplifier 4 -R113-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Remove the lower rear lid trim panel. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -3- and -4- on the Antenna Amplifier -R24- -1-.

Fig 1: Identifying Antenna Amplifier -R24- / Antenna Amplifier 4 -R113-
GWWA91-11705Courtesy of AUDI OF AMERICA, LLC

-- Remove the screw -2- and remove the Antenna Amplifier -R24- -1- from the rear lid.