Component Location Overview - Seals

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Seals Components Location Overview

Courtesy of AUDI OF AMERICA, LLC

Seal
- For the torque converter
- Replacing. Refer to TORQUE CONVERTER SEAL, REMOVING AND INSTALLING .
Left Seal
- For the flange shaft
- Replacing. Refer to LEFT SEAL, REPLACING .
O-Ring
- on the front final drive cover
- Replacing. Refer to FRONT FINAL DRIVE COVER O-RING, REMOVING AND INSTALLING .
Front Final Drive Cover
- Removing and installing. Refer to FRONT FINAL DRIVE COVER O-RING, REMOVING AND INSTALLING .
Right Seal
- For the flange shaft
- Replacing. Refer to RIGHT SEAL, REPLACING .
Seal
- For the transmission output shaft.
- Replacing. Refer to TRANSMISSION OUTPUT SHAFT SEAL, REPLACING .
Seal
- For the selector shaft
- Replacing. Refer to SELECTOR SHAFT SEAL, REPLACING .
Transmission