Selector Lever Sensor System Control Module -J587-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle. Refer to REMOVING .
-- Remove the Multimedia System Control Head -E380-. Refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Open the four tabs -arrows- and remove the Selector Lever Sensor System Control Module -J587- -item 2- upward. See illustration above.