LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Automatic Transmission - Controls & Housing) >> 37 Controls, Housing >> Automatic Transmission Fluid (ATF) Circuit >> Overview - Automatic Transmission Fluid (ATF) Circuit >> Measure The Length Of The Bleed Pipe On The Adapter For Oil Filling VAS 6262 A. Shorten It If Necessary.

Measure The Length Of The Bleed Pipe On The Adapter For Oil Filling VAS 6262 A. Shorten It If Necessary.

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Shortening Pipe On Adapter For Oil Filling VAS 6262 A
GWWN34-11768Courtesy of AUDI OF AMERICA, LLC

Shorten the pipe to dimension -a-. This assures the pipe on the adapter for oil filling VAS 6262 A will not touch the bottom on some oil containers.

NOTE:

Dimension -a- is measured starting from the shaft (the green surface) on the VAS 6262 A.

-- Make a mark on the bleed pipe, dimension a, and cut it, with the pipe cutter VAS 6056/2.

Fig 2: Cutting Pipe
GWWN34-11769Courtesy of AUDI OF AMERICA, LLC

-- Clean the Oil Filler VAS 6262 A.