Transmission, Removing, 6-Cylinder TDI Engine: Notes
WARNING: This page is about a different car, the 2015 Audi S7, 2014 Audi S7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry lever 80-200
- Engine and Gearbox Jack VAS 6931
- Hose Clip Pliers VAS 6362
- Tensioning Strap T10038
- Crankshaft Socket T40058
- Gearbox Support T40173
Preparing the Gearbox Support T40173:
-- The bracket attached to -item 1- must be removed.
-- The bracket -item 2- must be turned so that the longer side faces up as shown.