S Tronic Transmission on the 6-Cylinder or 8-Cylinder Gasoline Engine

WARNING: This page is about a different car, the 2015 Audi S7, 2014 Audi S7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Checking If Alignment Sleeves For Centering Engine/Transmission Are In Cylinder Block

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Nm
1 ¹⁾	M10 x 50 ²⁾	65
2 ¹⁾ , 3 ••• 6	M12 x 100 ³⁾	30 + 90°
7	M12 x 125 ³⁾	30 + 90°
8	M10 x 60 ³⁾	15 + 90°
9, 10	M10 x 95 ³⁾	15 + 90°
A	Alignment sleeve for centering
¹⁾ Mount the auxiliary adapter ²⁾ Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used. ³⁾ The bolts may be used two times, refer to S Tronic Transmission On The 6-Cylinder Or 8-Cylinder Gasoline Engine .