Selector Lever Sensor System Control Module -J587-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi S7, 2014 Audi S7, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle, refer to REMOVING .
-- Remove the Multimedia System Control Head -E380-, refer to MULTIMEDIA SYSTEM CONTROL HEAD -E380-, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Open the four tabs -arrows- and remove the Selector Lever Sensor System Control Module -J587- -item 2- upward.