Overview - Front Display And Control Head, "Convenience" Version
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
General Information, refer to CONTROL HEAD .
- A - Climatronic Control Module -J255- Control Head for Vehicles without Seat Heating/Seat Ventilation
- With infrared sensor for temperature and sunlight Determines the temperature and sunlight on the display and control unit
- 1 - Driver Side Temperature Preset Regulator
- 2 - Left Auto Button for Automatic A/C System Control
- Illuminated LED indicates the "Automatic control" function is selected
- 3 - A/C Button for A/C Compressor
- Illuminated LED indicates the "A/C compressor on" function is selected
- 4 - Display
- 5 - OFF
-Button for the Hearing and the Climate Controls
- Illuminated LED indicates the "off" function is selected.
- 6 - Right Auto
Button for Automatic A/C System Control
- Illuminated LED indicates the "Automatic control" function is selected
- 7 - Front Passenger Side Temperature Preset Regulator
- 8 - Rear Window Defogger Button
- Illuminated LEDs indicate the "Rear window defogger on" function is selected.
- 9 - Recirculation Mode Button
- Illuminated LEDs indicate the "recirculated-air mode" function is selected.
- The "recirculated-air mode" function is canceled when the defrost mode button (air to the windshield) is pressed
- 10 - Air Distribution Button
- The selected "air distribution" function is shown on the display
- 11 - Fresh Air Blower -V2- Button
- for setting the blower speed
- 12 - SYNC
-button
- Illuminated LED indicates the "SYNC" function is selected.
- By pressing the button the settings for the front driver side are applied to the front passenger side and if equipped also on the rear A/C display control head.
- 13 - Defrost Mode Button
- Illuminated LED indicates the "defrost mode" function is selected.
- B - Climatronic Control Module -J255- Control Head for Vehicles with Seat Heating/Seat Ventilation
- With infrared sensor for temperature and sunlight Determines the temperature and sunlight on the display and control unit
- 1 - Left Seat Heating Button
- Illuminated LED indicates the level selected.
- The selected level is set back one unit after a pre-set time, refer to FRONT SEAT HEATING, CHECKING => Depending on the vehicle, the seat heating setting automatically reduces after a certain amount of time (for example, after 10 minutes), refer to the Owner's Manual.
- 2 - Driver Side Temperature Preset Regulator
- 3 - Left Auto
Button for Automatic A/C System Control
- Illuminated LED indicates the "Automatic control" function is selected
- 4 - A/C
Button for A/C Compressor
- Illuminated LED indicates the "A/C compressor on" function is selected
- 5 - Display
- 6 - OFF
-Button for the Hearing and the Climate Controls
- Illuminated LED indicates the "off" function is selected.
- 7 - Right Auto
Button for Automatic A/C System Control
- Illuminated LED indicates the "Automatic control" function is selected
- 8 - Front Passenger Side Temperature Preset Regulator
- 9 - Right Seat Heating Button
- Illuminated LED indicates the level selected.
- The selected level is set back one unit after a pre-set time, refer to FRONT SEAT HEATING, CHECKING => Depending on the vehicle, the seat heating setting automatically reduces after a certain amount of time (for example, after 10 minutes), refer to the Owner's Manual.
- 10 - Right Seat Ventilation Button
- Illuminated LED indicates the level selected.
- The selected level is set back one unit after a pre-set time, refer to FRONT SEAT VENTILATION, CHECKING => Depending on the vehicle, the seat ventilation setting automatically reduces after a certain amount of time (for example, after 10 minutes), refer to the Owner's Manual.
- 11 - Rear Window Defogger Button
- Illuminated LEDs indicate the "Rear window defogger on" function is selected.
- 12 - Recirculation Mode Button
- Illuminated LEDs indicate the "recirculated-air mode" function is selected.
- The "recirculated-air mode" function is canceled when the defrost mode button (air to the windshield) is pressed
- 13 - Air Distribution Button
- The selected "air distribution" function is shown on the display
- 14 - Fresh Air Blower -V2- Button
- for setting the blower speed
- 15 - SYNC
-Button
- Illuminated LED indicates the "SYNC" function is selected.
- By pressing the button the settings for the front driver side are applied to the front passenger side and if equipped also on the rear A/C display control head.
- 16 - Defrost Mode Button
- Illuminated LED indicates the "defrost mode" function is selected.
- 17 - Left Seat Ventilation Button
- Illuminated LED indicates the level selected.
- The selected level is set back one unit after a pre-set time, refer to FRONT SEAT VENTILATION, CHECKING => Depending on the vehicle, the seat ventilation setting automatically reduces after a certain amount of time (for example, after 10 minutes), refer to the Owner's Manual.