Climatronic Control Module -J255-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Control Head And Hook

Courtesy of AUDI OF AMERICA, LLC

-- Note the general information, refer to GENERAL INFORMATION FOR ADJUSTMENT MOTORS .

-- Carefully remove the control head -1- at the left and right side with the Hook Tool T40207 out of the guides up to the first detent.

-- Tip the control head slightly downward and detach the hook -2- at the instrument panel.

-- Slide the safety mechanism -2- upward and Press the release -3- inward to disconnect the connectors -1, 4 and 5-.

Fig 2: Locating Connectors

Courtesy of AUDI OF AMERICA, LLC