Bracket For The Coolant Recirculation Pump -V50- And Coolant Shut-Off Valve -N82- / Heater Coolant Shut-Off Valve -N279-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Coolant Recirculation Pump Component Location Overview

Courtesy of AUDI OF AMERICA, LLC

-- Remove the plenum chamber cover, refer to Bulkhead .

-- Remove the fresh air intake shroud on vehicles with a Coolant Recirculation Pump -V50-, refer to FRESH AIR INTAKE, REMOVING AND INSTALLING .

-- Disconnect the connector.

-- Remove the bolts -3- and remove the coolant shut-off valve -2-.

-- Remove the bracket -4- from the clip nuts -6-.

-- Remove the bolts -5- and remove the Coolant Recirculation Pump -V50- -1-.