Passenger Compartment Forced Air Extraction, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Upper Cover And Vent Frame

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear bumper cover, refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Open the luggage compartment side trim panel cover.

-- Remove the upper cover -1- from the vent frame -2-.

-- Release the cover on the side -arrow- and remove it.

-- Open the clips -arrows- and push the forced air extraction vent frame -1- outward.

Fig 2: Upper Cover And Vent Frame

Courtesy of AUDI OF AMERICA, LLC