Passenger Compartment Forced Air Extraction, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is done is reverse order, observe the following:
-- Check the seal -1- for damages.
-- The ventilation frames -2- can only be installed in one position to ensure the sealing lips -3- close correctly.
- The larger radius -arrow- is at the top.
-- When installing, press the ventilation frame into the opening on the body until all the retaining tabs engage securely.
-- Reattach the cover on the vent frames.