LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Heating, Ventilation & Air Conditioning (Air Guide, Coolant Circuit, Display&Control Head,Additional Components)) >> 87 Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> Rear Air Guide Channel, Removing And Installing >> Removing

Rear Air Guide Channel, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Air Guide Channel
GWWA87-11058Courtesy of AUDI OF AMERICA, LLC

-- Remove the center console and the front center console bracket, refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the left rear upper body vent temperature sensor, if applicable, refer to LEFT/RIGHT REAR UPPER BODY VENT TEMPERATURE SENSOR -G635- / -G636-, REMOVING AND INSTALLING .

-- Move the rear air guide channel -1- upward -arrow B- and remove it from the locking mechanism on the air distribution housing -arrow A-.

-- Remove the rear air guide channel.