LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Heating, Ventilation & Air Conditioning (Air Guide, Coolant Circuit, Display&Control Head,Additional Components)) >> 87 Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> B-Pillar Vent Air Guide, Removing And Installing >> Removing

B-Pillar Vent Air Guide, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat to the forward and most elevated position.

-- Remove the B-pillar air guide, refer to B-PILLAR AIR GUIDE, REMOVING AND INSTALLING .

-- Remove the center console, refer to CENTER CONSOLE, REMOVING AND INSTALLING .

-- Remove the rear bench seat, refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .

-- Carefully lift up the floor covering.

NOTE:

Make sure to not rip the carpet at the cut-outs.

The left side is shown in the illustration.

-- Loosen the air guide -2- from the retainer -1- and remove it from the air guide -3- for the rear air guide channel.

Fig 1: Air Guide And Retainer
GWWA87-11062Courtesy of AUDI OF AMERICA, LLC

-- Loosen the air guide -1- for the rear air guide channel -3- out of the retainer and remove it.

Fig 2: Air Guide And Retainer
GWWA87-11063Courtesy of AUDI OF AMERICA, LLC