LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Heating, Ventilation & Air Conditioning (Air Guide, Coolant Circuit, Display&Control Head,Additional Components)) >> 87 Air Conditioning >> Air Guide >> Air Distribution Channels, Removing And Installing >> B-Pillar Air Guide, Removing And Installing >> Removing

B-Pillar Air Guide, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: B-Pillar Air Guide And Bolts
GWWA87-11001Courtesy of AUDI OF AMERICA, LLC
NOTE:

The left side is shown in the illustration.

-- Remove the upper B-pillar trim, refer to B-PILLAR TRIM PANEL, REMOVING AND INSTALLING .

-- Free up the wiring harness -1 and 3-.

-- Remove the Air Ionization System Control Module -J897- from the right air guide, if applicable, refer to AIR IONIZATION SYSTEM CONTROL MODULE -J897-, REMOVING AND INSTALLING .

-- Remove the bolts -2, 4 and 5- from the expanding clip.

-- Remove the air guide -6- upward.