LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Heating, Ventilation & Air Conditioning (Air Guide, Coolant Circuit, Display&Control Head,Additional Components)) >> 87 Air Conditioning >> Additional Components For Control And Regulation >> Outside Air Temperature Sensor -G17-, Removing And Installing >> Removing

Outside Air Temperature Sensor -G17-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Outside Air Temperature Sensor And Connector
GWWA90-10156Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover, refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Carefully press the retaining clips together -arrow- and pull the Outside Air Temperature Sensor -G17- -2- out of the mount.

-- Disconnect the connector -1-.