LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Heating, Ventilation & Air Conditioning (Specifications - Refrigerant Circuit)) >> 87 Air Conditioning >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
A/C Pressure/Temperature Sensor - 5
Bracket for Coolant Recirculation Pump/Coolant Shut-off Valve - 6
Compressor Drive Plate(1) - 30
Compressor Drive Plate Bolt(1) - 10
Compressor Belt Pulley Drive Plate(2)   30
Compressor Belt Pulley Drive Plate Bolt(2) - 20
Compressor Input Shaft - 30
Compressor Mounting Bolt - 25
Control Motors - 1
Coolant Recirculating Pump - 1.5
Coolant Shut-off Valve - 8
Dryer Cartridge Screw Plug - 2
Expansion Valve - 10
Fluid Reservoir to Condenser - 10
Fresh Air Blower - 1
Front Air Guides - 1.5
Heat Exchanger Hose Clamps - 2
Oil Drain Plug - 30
Pressure Relief Valve - 10
Refrigerant Lines to Condenser M6 9
Refrigerant Line to Compressor M8 25
Refrigerant Line from Compressor M6 9
Refrigerant Pipe to the Evaporator Retaining Plate - 5
Upper Section of Evaporator Housing - 2
(1) 8 Cylinder
(2) 4 and 6 Cylinder