LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Heating, Ventilation & Air Conditioning (Specifications - Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit >> A/C Pressure/Temperature Sensor -G395-, REMOVING AND INSTALLING >> A/C Pressure/Temperature Sensor -G395-, INFORMATION

A/C Pressure/Temperature Sensor -G395-, INFORMATION

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The cooling output cannot be tested for the A/C Pressure/Temperature Sensor -G395- if it is removed, the Climatronic Control Module -J255- control head does not turn on the A/C compressor, refer to Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

The refrigerant circuit remains closed when removing the A/C Pressure/Temperature Sensor -G395-, connection with valve.

Only the A/C Pressure/Temperature Sensor -G395- may be installed for this vehicle.

A High Pressure Sensor -G65- cannot be installed on this vehicle (it only delivers square-wave signals).

A condenser with a reduced height is installed on RS models. This A/C Pressure/Temperature Sensor -G395- is not accessible from the top.

scientia non olet · About LEMON Manuals