LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Refrigerant R134A Servicing (Refrigerant Circuit)) >> 87 Air Conditioning >> Refrigerant Circuit General Information >> Refrigerant Circuit Components Allocation, High And Low Pressure Sides >> O-Ring Seals

O-Ring Seals

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

These rings seal off the connection points between individual components of the refrigerant circuit.

Fig 1: Checking O-Ring Seal Diameters
GWWA87-0021Courtesy of AUDI OF AMERICA, LLC

Only O-rings that are resistant to refrigerant R134a and refrigerant oil must be installed. Make sure they are original replacement parts.

O-ring seals: 

-- Always use only once.

-- Make sure diameters -a- and -b- are correct.

-- Coat with refrigerant oil before installing. Refer to [For engine(s) CTUA, CEUC, CRDB, CGXB, CPNB] System Overview - Refrigerant Circuit (vehicle-specific repair information)

NOTE:

The color coding of refrigerant circuit O-rings with R134a has been discontinued. Black and colored O-rings are used. Refer to [For engine(s) CTUA, CEUC, CRDB, CGXB, CPNB] System Overview - Refrigerant Circuit (vehicle-specific repair information).