Commercially Available Tools And Materials
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
| Overview | Reference |
|---|---|
| Fin comb | see graphic |
| Charging hoses 5/8" - 18 UNF with valve opener | see graphic |
| Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8" - 18 UNF | see graphic |
| Valve caps 5/8"-18 UNF | see graphic |
| Pressure gauge set with pressure reducer for nitrogen | see graphic |
| Quick-release coupling adapter for service connections, 2x included in scope of delivery of service station | see graphic |
| The wrench size depends on the threaded connections on the refrigerant lines. | Not shown |
| Valve opener for charging hoses | Not shown |
| Connecting nipple for conical seal 5/8"-18 UNF | Not shown |
| Compressed-air gun with rubber end piece | Not shown |
| Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities). | Not shown |
| Valve opener for Schrader valve | Not shown |
| Hand shut-off valve 5/8"-18 UNF | Not shown |
| Recycling container for refrigerant R134a | Not shown |
| Digital thermometer | Not shown |
| Protective gloves not shown | Not shown |
| Protective glasses | Not shown |
| Refrigerant R134a with cylinder (capacity as required) | Not shown |