Night Vision System Camera -R212- Mount, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Connector, Screws, Mount, Clamp And Windshield Washer Fluid Hose

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lock carrier cover. Refer to Removing .

-- Disconnect the connector -1-.

-- Remove the screws -2, 3, 5 and 6- and then remove the mount -4- with the Night Vision System Camera -R212-.

-- Open the clamp -arrow- and remove the windshield washer fluid hose -7-.

-- If the mount is replaced, remove the Night Vision System Camera - R212-. Refer to NIGHT VISION SYSTEM CAMERA, REMOVING AND INSTALLING .