Fuel Pump Control Module -J538-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Install the right locking flange cover, refer to Figure.
-- Install the rear bench seat, refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Connect the battery. While doing so, follow all steps after connecting the battery, refer to BATTERY, DISCONNECTING AND CONNECTING .