Fuel Level Sensor -G-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Level Sensor G Pulled Slightly To Side And Simultaneously Upward

Courtesy of AUDI OF AMERICA, LLC

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Pull the Fuel Level Sensor -G- first slightly toward the inside and then upward and remove it -arrows-.

-- Release the retaining tabs -arrows- with a screwdriver, if necessary.

Fig 2: Fuel Level Sensor Electrical Wires

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector from the locking flange.