Fuel Level Sensor -G-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Insert the Fuel Level Sensor -G- in the guides on the fuel delivery unit and push down until it engages.
-- Connect the connector. Make sure it is secure.
-- Install the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .