Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver side lower instrument panel cover, refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2- by pressing the release -1- up -arrow-.

-- Remove the bolt -3- and remove the accelerator pedal module downward.