LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (3.0L & 4.0L - Fuel Supply - Engine Code(S): CEUC, CGXB, CRDB & CTUA) >> 20 Fuel Supply >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Accelerator Pedal Module - 8
Air Filter Housing, Nut - 8
Bolt for Securing the Fuel Filler Neck - 20
Carrier Plate - 20
EVAP Canister 2
  - 1.5
  - 20
Fuel Tank - 20
Fuel Tank Leak Detection Control Module to EVAP Canister - 1.5
Fuel Pump Control Module - 1.6
Lock Washer for Heat Shield - 2
Locking Flange Cover - 1.5
Locking Ring - 110
Protective Plate for Fuel Filler Tube 1
  - 3.5
  - 20
Suspended Mount for Exhaust System - 20