LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (3.0L & 4.0L - Fuel Supply - Engine Code(S): CEUC, CGXB, CRDB & CTUA) >> 20 Fuel Supply >> Fuel Delivery Unit/Fuel Level Sensor >> Fuel Level Sensor -G-, Removing And Installing >> Removing

Fuel Level Sensor -G-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Fuel Level Sensor G Pulled Slightly To Side And Simultaneously Upward
GWWN20-10175Courtesy of AUDI OF AMERICA, LLC

-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Remove the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .

-- Pull the Fuel Level Sensor -G- first slightly toward the inside and then upward and remove it -arrows-.

-- Release the retaining tabs -arrows- with a screwdriver, if necessary.

-- Disconnect the connector from the locking flange.

Fig 2: Fuel Level Sensor Electrical Wires
GWWA20-10067Courtesy of AUDI OF AMERICA, LLC