Fuel Level Sensor -G-, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Insert the Fuel Level Sensor -G- in the guides on the fuel delivery unit and push down until it engages.
-- Connect the connector. Make sure it is secure.
-- Install the fuel delivery unit, refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Connect the battert. While doing so, follow all steps after connecting the battery, refer to BATTERY, DISCONNECTING AND CONNECTINGRemoval and Installation .