LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (3.0L & 4.0L - Fuel Supply - Engine Code(S): CEUC, CGXB, CRDB & CTUA) >> 20 Fuel Supply >> Fuel Delivery Unit/Fuel Level Sensor >> Fuel Delivery Unit/Fuel Level Sensor, Removing And Installing >> Removing >> Disconnect The Fuel Delivery Unit And Sealing Flange:

Disconnect The Fuel Delivery Unit And Sealing Flange:

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Connecting Line
GWWA20-10796Courtesy of AUDI OF AMERICA, LLC

-- Cut the plastic connecting line -arrow-.

NOTE:

The connecting line is only an assembly aid and it no longer needs to be installed.

-- Disconnect the connectors -2 and 3-.

Fig 2: Identifying Connectors
GWWA20-10797Courtesy of AUDI OF AMERICA, LLC

-- Remove the fuel supply line -1- from the fuel pressure regulator. Disconnect the connector couplings, refer to CONNECTOR COUPLINGS, SEPARATING .

-- Remove the locking flange from the fuel delivery unit.

scientia non olet · About LEMON Manuals