Leak Detection Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions, refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions, refer to CLEAN WORKING CONDITIONS .
-- Remove the rear left underbody trim panel, refer to REAR UNDERBODY PANEL, REMOVING AND INSTALLING .
-- Remove the EVAP canister, refer to EVAP CANISTER, REMOVING AND INSTALLING .
-- Loosen the clamp and remove the breather line -2-.
-- Remove the bolts -1-.
-- Remove the Fuel Tank Leak Detection Control Module -J909- item -3- from the EVAP canister in direction of -arrow-.