LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (3.0L & 4.0L - Fuel Supply - Engine Code(S): CEUC, CGXB, CRDB & CTUA) >> 20 Fuel Supply >> Accelerator Pedal Mechanism >> Overview - Accelerator Pedal Mechanism

Overview - Accelerator Pedal Mechanism

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accelerator Pedal Module Overview
GWWA20-10304Courtesy of AUDI OF AMERICA, LLC
  1. Accelerator Pedal Module
    • With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
    • Checking in Guided Functions  see Vehicle Diagnostic Tester
    • Removing and installing, refer to ACCELERATOR PEDAL POSITION SENSORS -G79 - / - G185 -, REMOVING AND INSTALLING .
    • An adaptation may need to be performed after replacing, depending on the engine/transmission combination.
    • If there is a menu option in "Guided Functions", perform an adaptation. see Vehicle Diagnostic Tester
  2. Pedal Bracket
  3. Bolt
    • 8 Nm
  4. Connector