LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (3.0L & 4.0L - Fuel Supply - Engine Code(S): CEUC, CGXB, CRDB & CTUA) >> 20 Fuel Supply >> Accelerator Pedal Mechanism >> Accelerator Pedal Position Sensors -G79 - / - G185 -, Removing And Installing >> Removing

Accelerator Pedal Position Sensors -G79 - / - G185 -, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi RS 7, and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-
GWWA20-10380Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver side lower instrument panel cover, refer to INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2- by pressing the release -1- up -arrow-.

-- Remove the bolt -3- and remove the accelerator pedal module downward.

scientia non olet · About LEMON Manuals