Outside Air Temperature Sensor -G17-
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Removal
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Squeeze the clips carefully -arrow- and remove the Outside air temperature sensor -2- upward.
-- Disconnect the electrical connector -1-.
Installation
Install in reverse order of removal, observing the following:
-- Install the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
After completing the repair, perform the following on the Front A/C display control head -E87- using the Vehicle Diagnostic Tester in "Guided Fault Finding" :
-- Read the DTC memory and erase any entries.