Tightening Sequence
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi A7 Quattro, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
| Sequence | Screw Number | Tightening Specification |
|---|---|---|
| 1 | 1 | 2 + 2 Nm |
| 2 | 2 | 4 + 2 Nm |
| 3 | 1 | 8 + 2 Nm |
| 4 | 2 | 8 + 2 Nm |
-- Connect the connector to the actuator.
-- Erase the Diagnostic Trouble Code (DTC) memory.
-- Perform an initializing drive - turn the vehicle 45° to the left/right from the straight-ahead position.
Functional Check
Check the function of the steering during the road test and a fenced off area.
- Operating force
- Reset
- Play
- Noise
- Indicator lamp
- Read the DTC memory after the road test. There must be no faults in the DTC memory.