LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Front Suspension) >> 40 Front Suspension >> Suspension Strut And Upper Control Arm >> Suspension Strut, Servicing >> Suspension Strut, Servicing, Coil Spring Shock Absorber >> Replacing Shock Absorber

Replacing Shock Absorber

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi A7 Quattro, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Shock Absorber Components
GWWA40-10566Courtesy of AUDI OF AMERICA, LLC

-- Remove the cap -1- and the lower spring support -2-.

-- Loosen suspension strut -3- using plastic hammer and remove upward.

-- Install the spring plate -3- onto the new shock absorber -4- using a rubber hammer.

scientia non olet · About LEMON Manuals