Suspension Strut, Removing And Installing, Coil Spring Shock Absorber: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi A7 Quattro, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Attach the steel spring damper to the body first.
-- Tighten the new nuts -arrows- diagonally.
Applies to vehicles with DRC
-- Fill the DRC system, refer to DYNAMIC RIDE CONTROL (DRC), DRAINING AND FILLING .
-- Install the wheel, refer to WHEELS AND TIRES .