Subframe With Steering Gear, Removing And Installing: Installing: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S7, 2015 Audi A7 Quattro, 2014 Audi S7, 2014 Audi A7 Quattro, and 2013 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
WARNING:
Pull on the -item 2- in OVERVIEW - STEERING COLUMN, POWER steering intermediate shaft to make sure it is installed correctly with the bolt installed. Tighten the bolt -item 1- in OVERVIEW - STEERING COLUMN, POWER .
NOTE:
Perform a pre-adjustment on the subframe if it is being replaced or if it had to be removed in order to loosen the crossbrace.