Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

-- Electrical connections and wiring routing, refer to appropriate SYSTEM WIRING DIAGRAM.

-- Connect the coolant hose to the coupling, refer to Figure.

-- Install the charge air cooler, refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .

NOTE:

Do not reuse used coolant.

-- Fill the coolant, refer to Filling .