Auxiliary Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front noise insulation, refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the left front wheel housing liner, refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the front bumper cover, refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Unclip air duct -1- and remove -arrow-.

Fig 1: Identifying Front Bumper Cover

Courtesy of AUDI OF AMERICA, LLC

-- Place the Shop Crane - Drip Tray VAS 6208 underneath.

Fig 2: Identifying Radiator And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off and remove the coolant hoses with the Hose Clamps - Up To 25 mm 3094 by loosening the hose clamps -arrows-.

-- Remove the bolts -2-.

-- Remove radiator -1- from the bracket from above.