Overview - Coolant Pump
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Depending on the version aluminum or steel bolts
- Aluminum bolts 3 Nm +90° turn
- Replace the aluminum bolts
- Steel bolts 9 Nm
- Tighten diagonally in steps
- Coolant Pump Ribbed Belt Pulley
- Installation position: the word "vorne (front)" facing in drive direction
- Bolt
- 23 Nm
- Coolant Pump
- There are different versions. For the correct allocation .
- Removing and installing, refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Replace the coolant pump if the seal is damaged