Engine Coolant Temperature Sensor On Radiator Outlet -G83-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Coolant Reservoir Cap

Courtesy of AUDI OF AMERICA, LLC

The engine is cold.

-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.

-- Remove the front noise insulation, refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Disconnect the connector -1-.

Fig 2: Engine Coolant Temperature Sensor on Radiator Outlet

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Use a cloth to catch any leaking coolant.

-- Remove the clamp -2- and the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.