LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (3.0L - Cooling System - Engine Code: CPNB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Coolant Temperature Sensor -G62-, Removing And Installing >> Installing

Engine Coolant Temperature Sensor -G62-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings.

Insert the new Engine Temperature Control Sensor -G62- immediately to prevent coolant loss.

-- Check the coolant level, refer to Check the coolant level .

scientia non olet · About LEMON Manuals