Transmission Fluid Cooling Valve -N509-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation, refer to NOISE INSULATION, REMOVING AND INSTALLING .
Vehicles with S Tronic Transmissions 0B5 or 8-speed Automatic Transmissions 0BK:
-- Disconnect the connector -2-.
-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the Hose Clamps - Up To 25 mm 3094 and remove them.
-- Remove the bolts -arrows- and then remove the Transmission Fluid Cooling Valve -N509-.