LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (3.0L - Cooling System - Engine Code: CPNB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valve, Removing And Installing >> Transmission Fluid Cooling Valve -N509-, Removing And Installing >> Installing

Transmission Fluid Cooling Valve -N509-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

To prevent coolant loss, immediately insert the new Transmission Fluid Cooling Valve -N509-.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Check the coolant level, refer to Check the coolant level .

scientia non olet · About LEMON Manuals