LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (3.0L - Cooling System - Engine Code: CPNB) >> 19 Cooling System >> Coolant Pump/Thermostat >> Coolant Valve, Removing And Installing >> Coolant Shut-Off Valve, Removing And Installing >> Installing

Coolant Shut-Off Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Install the exhaust gas recirculation cooler, refer to EGR COOLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals