Check Valve, Removing And Installing, Cylinder Bank 2 (Left): Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Remove Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to DRAINING .

-- Remove the left engine mount, refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the left engine support.

-- Remove the bolts -arrows-.

Fig 2: Bolts, Clamp & Check Valve

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamp -2- and remove the coolant hose.

-- Remove the check valve -1-.