Coolant Pump, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bolts And Wrench - Pin Type 3212

Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant, refer to Draining .

-- Remove the ribbed belt, refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- for the coolant pump ribbed belt pulley using a Wrench - Pin Type 3212 to counterhold.

-- Place the Shop Crane - Drip Tray VAS 6208 under engine.

Fig 2: Remove The Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the coolant pump.