LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (3.0L - Cooling System - Engine Code: CPNB) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Front Left Coolant Pipe, Removing And Installing >> Installing

Front Left Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

Install in reverse order of removal. Note the following:

-- Install the A/C compressor bracket, refer to AUXILIARY COMPONENTS BRACKET, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals