Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro, 2014 Audi A7 Quattro, 2013 Audi A7, and 2012 Audi A7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

-- Electrical connections and wiring routing, refer to appropriate Wiring Diagram.

-- Connect the coolant hose to the coupling, refer to Figure.

-- Install the front charge air cooling circuit radiator, refer to INSTALLING .

-- Install the front bumper cover, refer to BUMPER COVER, REMOVING AND INSTALLING .

NOTE: Do not reuse used coolant.

-- Fill the coolant, refer to FILLING .